| Step | | Procedure & Parts & Tools |
| 1 |
|
LOCATE THE UNLOCK BUTTON ON THE BACK OF THE MACHINE. SLIDE THE BUTTON TO OPEN.
|
| 2 |
|
LIFT UP ON THE BODY TO DISCONNECT IT FROM THE BASE.
|
| 3 |
|
LAY THE NECK DOWN PARALLEL TO THE BASE.
|
| 4 |
|
FLIP THE BASE OVER. REMOVE THE 7 SCREWS.
| Screwdriver-phillips |
|
|
| 5 |
|
FLIP THE BASE BACK OVER AND PULL UP ON BASE COVER TO REMOVE IT.
|
| 6 |
|
REMOVE THE 2 SCREWS HOLDING THE TRANSMISSION SUPPORT.
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE TRANSMISSION SUPPORT FROM THE MACHINE.
|
| 8 |
|
REMOVE THE BELT FROM THE TRANSMISSION SUPPORT.
|
| 9 |
|
TO REPLACE THE BELT, FIRST SLIDE THE BELT BETWEEN THE BASE AND BRUSH MOTOR PULLEY. REVERSE STEPS 1 THRU 7 TO INSTALL A NEW BELT.
|